3145

Being a brand founded over ten years ago, our urge for nostalgia is a strong pillar of our doing. We cured these itches with our renditions of the AnY Air Rider and the SPYY Radian (Thunder & Lightning). Another great yoyo of the past was The Cut by hspin. It featured a radical design twist where only linear contours were used to create the overall shape. We still love this idea to this day so we thought ‘why not make a fun yoyo with this concept’. Said and done.

We give you the 3145 (BIAS) – a mid-sized, lightweight yoyo with lots of edges. No fancy weight rings, grooves, cups, splashes etc. Just a fun throw for some quality time.

Here’s a CAD image of the profile. All straight lines, no curves aside from deburring radii. :)

Specs:
Diameter: 54.00mm
Width: 43.00mm
Weight: 63.30g
Response: Hot Red SILYYcone
Bearing: ILYY KMKg C-Size
Coating: Candodize (silver grey)
Material: AlMGSi1
Limitation: 20

We have 18 pieces available for purchase right now for 65€ a piece. There will not a be a second batch, this is a one time project. Shipping will be around end of next week.

Order via email: info (at) ilyy (dot) de

DR3I

When we started making yoyos 11 years ago, we came up with the idea to call our first yoyo E1NS. ‘Eins’ being the German word for ‘one’. After the outcome, its impact and success exceeded our wildest expectations, we naturally began thinking about a successor. It just had to be called 2WEI, the German word for ‘two’, even though it wasn’t our second yoyo at that time. It was just fitting into the scheme.

With the 2WEI we didn’t create an entirely new yoyo, but supersized the E1NS for those who are more into large wide throws. It was not as successful as its little brother was, but it is far more limited and thus highly sought after with collectors.

After these two yoyos saw the light of day and went through several iterations it became silent about our iconic numbered series. It was in June 2016, when we came up with the idea to make it a trilogy. But we knew, it must be something special, something totally bonkers. The DR3I would have to be on the “never been done” level. The topic is number three, so it was clear to us where we need to go: tri-metal

The first question that arose was how to implement three metals into a yoyo design. Just two weight rings? We found that this doesn’t make that much sense. So it had to be a base body, weight rings and something else. Then we remembered the fabulous Pure by SPYY. With the Pure, the cup was closed by fitting a thin disc inside. That gave the yoyo a unique look and feel. Then we remembered our entry into bi-metal/fingerspin yoyos with the Abyss and our struggle with the convex cup profile. The problem with a convex cup that is suitable for self-centering fingerspins in a mono body design is the overall wall thickness that is needed. So what if you circumvent this by using a thin body in combination with a fitted concave cup? We knew, this is the solution to the problem. By this, we also knew how the three metals should be distributed:

Titanium for the body: Titanium can be machined to very thin thickness and still remains its strength properties. Ideal for a yoyo body.

Steel weight rings: With its high density, steel allows for a nice rimweight when used as weight rings.

Aluminum cup: Aluminum is very light and can be anodized with great effects giving the final yoyo great looks.

This inserted cup design finally allowed us to use a dimple in the cup center to improve the spin stability and the self-centering properties, which we could not achieve with the Abyss design.

The next challenge was to find a partner willing to make this vision a reality with us. After many inquiries, we realized we had to look internationally. We finally found a brave machining shop near Hong Kong, that was ready for the challenge. We were impressed by their dedication and attention to detail. Nevertheless, it took us an entire year to finalize the design and production.

Now we can finally show you the finished product. So here it is, the ILYY DR3I!

  

Specs (Prototype):
Diameter: 54mm
Width: 39mm
Weight: 62.5g
Response: Hot Red SILYYcone
Bearing: ILYY KMKct C-Size
Coating (Cup): CeramicBlast (Siver, green, yellow acid wash, red splash)
Material: Tri-Metal construction (Titanium Body, Stainless Steel Rings, Aluminum Cup)
Limitation: 2

  

The aluminum cup is fitted into the steel ring from the backside and the assembly is then fitted into the titanium cup. This allows for a seamless transition between the metals. We rely on our custom Hot Red sILYYcone response and a custom KMKct c-size bearing.

On the backside of the aluminum cup, we lasered the meaning of two of our up until now undisclosed acronyms: KMK and PYBIT. So the solution will be out there but still kept safe, unless….

We are still exploring anodization on titanium to achieve better contrast to the weight rings. This will be addressed in the planned release.

Let us know by email (info at ilyy dot de), if you are interested in getting one from the run. We have to test the waters here and check the demand beforehand. The run will nevertheless be very limited (10 max.).

We plan to sell these for 350€ a piece. So let us know, if you want to call a piece of ILYY history your own.

 

The bimetals are ready!

Now that we delved into the titanium world, there was another thing we haven’t done in our 10+ year journey into yoyos yet: bimetal construction!
Said and done. Double release again.

 

First up: Frank’s entry, a full-size mid-weight powerhouse: The Prometheus
Diameter: 56mm
Width: 42mm
Weight: 65.5g
Response: Hot Red SILYYcone
Bearing: ILYY KMK C-Size
Coating: CeramicBlast (red)
Material: 6082 AlMgSi1 Aluminum,  AISI 303 Stainless Steel Rings
Limitation: 10

The second: Dominik’s view into The Abyss
26626871731_26dd41afee_h
Diameter: 57mm
Width: 43.5mm
Weight: 63.5g
Response: Hot Red SILYYcone
Bearing: ILYY KMK C-Size
Coating: CeramicBlast (black)
Material: 7075 Aluminum Body, AISI 303 Stainless Steel Rings
Limitation: 10

Both yoyos are available directly from us (email). Price is 100€ each.

 

Introducing the TiGER

In every yoyo creator’s life there comes a time when he thinks about titanium. This metal is quite different from the so commonly used aluminum alloys. It is significantly stronger thus allowing thin parts of the yoyo to be even thinner. But this strength comes at a price: the density of titanium is much greater than those aluminum alloys and the material is a lot harder to machine properly.

We’ve been thinking about making a titanium yoyo for years but never came around to actually cut to the chase. That is until now. Together with Dave Geigle of the Germany-based iYoYo we faced that task. The result is nothing less than spectacular. Enter the TiGER (Titanium GERmany).

DSC_8227

The yoyo is loosely based on our very own Torino (profile) and the iYoYo2 (gap area). However, it is optimized for the titanium frame and is 57mm in diameter for insane inertia.

DSC_8232DSC_8221

Diameter: 57.00mm
Width: 42.40mm
Weight: 66g
Response: Silicone Pads
Bearing: C-Size Cermanic KK
Material: Titanium
Limitation: tba

The yoyo is currently available for preorder at a discounted price at Yo-Shop.de and will ship in October in either Gold or Raw.

Heavy Metal Thunder & Ride The Lightning!

It’s been a while since we pumped out some pieces but here we are again. This time with something very special (at least for us).
Back in day in in 2006/07, when the high-end metal market was born, we got our hands on two yoyos we still treasure to this day. The Radian MKII by SPYY and the Air Rider by AnY. Both yoyos were way ahead of their time and blew us out of the water. Sadly, these models haven’t been in production for many years.

The Nostalgia
Frank remembers fondly what a thrill it was to purchase a high-end yoyo back then. It felt like there was only one or two big yoyo releases per month and everybody talked about just a hand full of models. Some of you might remember the Eetsit or Bapezilla for instance. The Air Rider was incredible expensive compared to what the marked had to offer at this time and a lot of thought went into the purchasing process for him – it was way over the budget. Frank thought day and night if it would be reasonable to put such a great amount of money on the table – it’s still just a toy, right? The final conclusion was: “Ah, whatever!” That’s usually not the sign of a rational decision, it was about passion. After the decision was made and the order had been placed the long wait for the overseas shipment with customs and all the hassle was quite nerve wrecking. He remembers tracking the package at least once a day and getting worried that the shipment might get lost in transit (what never happened once in all these years).
Finally throwing the Air Rider was thus even more exciting and Frank was quite afraid of damaging such a precious yoyo. The buying and playing experience is still memorable and vivid to this day and hasn’t been matched by any other yoyo – it was just special. Looking at the yoyo today still invokes all these memories and emotions.

When Dominik met Frank for the first time, his Radian was currently being shipped to Germany. However, Frank brought his Radian and Dominik was immediately hooked when he held it in his hands for the first time. Even though, Dominik got a Pyro a few months earlier (his first modern metal yoyo), the Radian put its spell on him. It’s still one of his favourite yoyos and thus it was only reasonable to pick the MK2 when the idea to recreate classics arose.

The Decision
Compared with to flooded market today with too many models from too many manufacturers that get released over a short time span, the increased price of high-end models and the consistent high quality of lower priced yoyos, it just does not feel as special anymore to purchase and receive a high-end metal yoyo. Most yoyos feel and look the same these days. With Shapes dialling in on competition style with straight v-profiles, finger-spin friendly hub areas and high RPM centre weight focused designs, we miss these classics even more. Naturally, nostalgia was a great factor that went into the decision of creating yoyos that are directly inspired by beloved classics. Because of this and the fact that both manufacturers are out of business by now, we decided to bring them back with ILYY flavour. On a side note: Frank always wanted an Air Rider with o-rings (Dominik still has one but is not willing to part with it), what was kind of hard to get back then.

ILYY Lightning & ThunderModels & Specs
The Lightning is an homage to the AnY Air Rider with even more power and stability. The pads are gone and have been replaced by our trusted Hot Red sILYYcone response system and the typical metric bearing.

ILYY Lightning ILYY Lightning Profile View

Diameter: 53.50mm
Width: 37.10mm
Weight: 67.80g
Response: Hot Red SILYYcone
Bearing: ILYY KMK 6x13x5mm
Coating: ILYY Candodize (Titanium Grey)
Material: 6082 AlMgSi1 Aluminium
Limitation: 10

The Thunder features a similar profile as the Radian does but has “edgier” contours and sports a large KMK bearing als well a our Hot Red sILYYcone response system.

ILYY Thunder ILYY Thunder Profile View

Diameter: 53.90mm
Width: 40.00mm
Weight: 66.30g
Response: Hot Red SILYYcone
Bearing: ILYY KMK 6x13x5mm
Coating: ILYY Candodize (Titanium Grey)
Material: 6082 AlMgSi1 Aluminium
Limitation: 10

For the engravings, we’ve used a font called Sunbather from the Artist Nick Steinhardt that was used on the identically named album Sunbather by Deafhaeven.

Purchase & Production
These are just prototypes for now. We have not yet decided if we will follow up with a production run. These colours are only for the prototype batch, they might change for a release (if there will be one). The chances are slim, since we don’t expect any demand for yoyos with this “outdated” style as some testers called them. For now, there are 5 prototypes of each model available for sale. If you are interested, just send us an email.

Enter the Nile

This time we have something special for you guys. We teamed with the awesome guys of the epic Technical Death Metal band Nile and used their band logo for the laser engraving. How cool is that?!

Nile    9463662839_6c332b4225_z 9466442910_f3e52f8fbd_z

Shipping next week. Will be available at YYE, LTYY, YYSR and Yo-Shop.

ILYY and OneDrop join forces!

This has been cooking for a while now but we can finally announce the result of joined forces between OneDrop of USA and ILYY. The SE Sakura!

SE Sakura colour range

From left to right with quantities in brackets: Hair Band (25), Broken Heart (50), Light Dusk (25), Cobalt (50), Dark Dusk (25), Melon (25)

Another picture of the whole lot:

8487694920_983586327b_z

OneDrop created a brand new side effect for the SE Sakura resembling the original shape of the horn.

Exclusive SE Sakura side effects

We incorporated ace laser engraving to every yoyo.

SE Sakura laser engraving

Specs:

Base Weight (two halves, response pad, bearing): 62.82g
Weight with aluminum Sakura Side Effects: 65.72g
Width: 41.25mm
Diameter: 52.00mm
Stock Response: Flow Groove
Gap Width: 4.34mm
Bearing Size: Large (C) stainless steel (One Drop 10 Ball Bearing)
Finish: Pyramatte

They will be available from the OneDrop store on February 25th with discounted international shipping.

Enter the Nile!

We can finally show you the first prototypes of our most recent design: the Nile

ILYY Nile Prototype

Diameter: 56.00mm
Width: 44.00mm
Weight: 66.20g
Gap: 4.20mm
Response: Hot Red SILYYcone
Bearing: ILYY KMK Metric
Coating: Soda Blast (Black/Gold Splash)
Material: 6062 Aluminum
Limitation: 11

There will be a total of 11 prototypes for sale. You can buy them directly from us via email for 75€ plus shipping. The remaining ones will go to international shops.

Since we have no experience with high RPM/mid-weight-focused yoyos yet, further testing and feedback is required before we decide if we keep developing this design. It plays great, but feels vastly different than what we are used to. We are not sure if it feels “right”.

Nile

We decided to take a dive into the centerweight-trend and Frank began designing a new yoyo he called Nile. Here are his notes on the design along with a first CAD render image.

As many people suggested, I’ve designed a yoyo in the modern vein. More centerweight and thus higher RPM that is. Its all about getting the right balance between spintime and RPM. So we needed to shift some weight to the center to get higher RMP value.

So, here is our first dip into high RPM yoyos.

The Nile

Diameter: 56.00mm
Width: 44.00mm
Weight: 66.20g
Gap: 4.20mm
Response: Hot Red SILYYcone
Bearing: ILYY KMK metric

As you can tell, we have this typical yoyo in a yoyo design here. The inner rim area has a diameter 36.44mm the outer diameter of the inner yoyo is about 45mm. The whole rim stretches over 9.78mm. I’m not quite sure if this is enough to make a huge difference playwise. But we’ll see.

The rims have linear elements (parallel and collinear) that reduce visual tension. I was going for round lipped rims first but that way it got way too heavy. In order to maintain a small (diameter) inner yoyo, I had to cut away a part of the rim, thus it is flat now. I had difficulties getting the outer rim thin enough to shift enough weight to the center while still maintaining a good haptic. We had this issue with the fist Lynx prototype as well: it had too thin rims at the outermost point. Therefore it felt quite unpleasant and gave a cheap impression. Both rims might be useable for thumb grinds. However, this is just a design study, we have yet to try it out once it is machined.

A high wall (flat area around the response area) is more or less absent this time. That should prevent the yoyo from tilting too much if the strings are not perfectly parallel. I’m not into horizontal play, as a matter of fact, I can’t do a single horizontal style trick. But this feature should suite this playstyle well. Correct me if I’m wrong.

The profile turned out to be quite traditional, what is good for a competition yoyo, I guess. But basically it follows the inner shape (horn to rim). That’s quite a difference for me. Usually, I focus on the profile first. The inner area just arises from working out the desired weight. But this time, it’s different. The top area of the profile meets the rim in a Lio-ish kind of way. I really like that, it should result in a quite comfortable hold.

Overall, the design incorporates flat and curved surfaces, I tried to keep it as consistant as possible and threw in some linear parts here and there as you can see in the profile and from the horn to the rim.

I took some inspiration for the name from one of my favorite metal bands – Nile. I was listening to their music while designing the yoyo. The name also serves as great basis for an awesome engraving that has yet to be created. The Egyptian mythological theme will be realized by a certain coating or color way.

Prototype will be made in the next weeks. I hope to get it before the Christmas holidays.

By the way, any similarity to any existing yoyo is just coincidence. I intentionally did not look at yoyos that feature this particular style before I started designing. I wanted my design to be as unaffected by existing designs as possible. But as a matter of fact, yoyos tend to look more similar to each other than, say 2 years ago. The design features are nearly the same overall. That is especially true when it comes to a certain style of yoyos, as seen here with the centerweight/higher rpm focus.

So far…
Frank

More information will posted soon. Stay excited!